SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - In time, lift truck parts will wear and need to be replaced. Purchasing new components can become a pricey undertaking so another idea is to acquire used lift truck components. This can save a lot of money in the long run. It is a great idea to buy used forklift parts which have been remanufactured. These components would guarantee that you are getting parts that would work for a long time and be productive.
Worn or broken parts that are remanufactured are a less expensive answer as opposed to rebuilding. With rebuilding components, only the components that are worn out or broken get changed, which means that other wearable components might break down soon after acquisition.
Remanufactured parts are cleaned after being taken apart and have the unusable components changed. This technique could offer the best assurance for second-hand components. All wearable components are replaced regardless of age or wear which is another rationale why remanufactured parts in general perform so much better. Any component within the part is new and this provides far longer life to the used part. Based on the forklift parts that are being redone, the cleaning process and the complete remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Different engine parts like for instance pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are another thing that is oven cleaned after being disassembled. The transmission is then pressure washed. A thorough inspection is performed in order to check for any cracks. Bushings, seals and bearings are all replaced. Normally, the replacement components used on transmission parts meet OEM specifications.
A few lift truck parts like for instance the alternator, the water pump, torque converters, steer axles and the starter could be quite serviceable after worn parts are replaced. The electronic control in the electric lift truck is maintained by the control card. This particular card can likewise be remanufactured with replacing all aged and worn out parts. Unlike other lift truck components the control card could only have the worn and aged parts replaced.
Components which are reproduced have to be meticulously inspected upon reassembly to ensure they are in good condition before being sold. When purchasing these components, it is a good idea to make sure that they have undergone all of the proper testing and inspections. On certain bigger parts such as steer axles, engines and transmissions, OEM specification replacement components must be used.
The forklift dealer can ensure that the parts they have reproduced meet the OEM specifications. This will also guarantee the parts meet industry standards. Lots of details go into remanufacturing used parts. This attention to detail provides more serviceability out of reproduced parts opposed to the components that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Minneapolis, Minnesota
forkliftpartsminneapolis.com
Email Us
About Us